What necessary preparations should be made for the installation of deep well pump coupling?

DATE：2017-03-09 17:40:05

As one of the most widely used drainage equipment in the city, the pumping well is widely used in the field of water conservancy. It can be said that the demand of its application is very strong. In order to ensure the ideal application effect, the early installation steps must be carried out in strict accordance with the regulations. The specific points include the following parts:

1. Control of rated power

In order to ensure the normal operation of the equipment, the rated power of the equipment itself must be controlled in a reasonable range. In general, the rated power can be maintained in the range of about 15 kW.

2. Use environment

At this point, strict control must be carried out. If the application environment can not meet the basic application requirements, then its working condition will be greatly affected.

3. Necessary inspection

Before installation, adequate inspection is an effective way to reduce accidents. For example, check whether the diameter and depth of the well meet the relevant requirements. In addition, the external insulation material performance is also need to pay attention to the content. And the specific protection measures must be paid attention to, and many designers will protect the basic safety problems through the application of protection switch.

4. Cable fixation

In the process of installation, it is very important to fix the cable, especially in the process of going down the well, it is necessary to do a good job of protection to prevent damage.

Of course, to do the above preparation work is the most basic, in the specific operation, there are many points need to pay attention to, which requires the staff to explore slowly.